HDPE blowing machine

perfect plasticization effect high output excellent quality easy operation low consumption

 HDPE plastic film blowing machine 

This blown film machine adopts the screw and the die of the latest design, which greatly improves the plasticizing effect and enhances the output. With the high-efficiency air blower and special air ring, it truly achieves high quality, high speed and low consumption.

 Uses:

It is suitable for blowing the plastic film as high density polyethylene (HDPE), low density polyethylene (LDPE) and linear low density polyethylene (LLDPE), which is widely used for packing fruit, foot, garment, textile, daily-use articles and industrial products etc.  

 

Technical parameters:

Specification     Model	SJ65×28-FMS1200	SJ55×28-FMS1100	SJ55×28-FMS800	SJ45×28-FMS650	SJ40×28-FMS500
Screw Diameter(mm)	Ø65	Ø55	Ø55	Ø45	Ø40
Screw Ratio(L/D)	28:1	28:1	28:1	28:1	28:1
Heater Capacity(kw)	14	11	11	7.2	7.2
Main Motor Power(kw)	30	18.5	18.5	11	7.5
Temperature Controller Panel(zone)	6
Take-up Roller Width (mm)	1200	1100	800	650	500
Take-up Power(kw)	1.5	0.75	0.75	0.75	0.75
Take-up Speed (max.m/min)	80	80	100	100	80
Die Diameter(mm)	(Ø)100-120	(Ø)100-120	(Ø)80-100	(Ø)50-70	(Ø)40-70
Air Blower Power(kw)	5.5	4	4	3	2.2
Film Width(mm)	400-1100	250-1000	250-700	160-550	80-400
Film Thickness(mm)	0.01-0.10	0.01-0.10	0.01-0.10	0.008-0.06	0.008-0.06
Extrusion Output(kg/h)	30-80	20-60	20-60	15-40	10-30
Assembling Dimension (L×W×H m)	5×4×6	5×2.5×5	5×2.5×4.8	5×2×4.2	5×2×3.8
All these technical parameters can be varied with customers’ request.

Optional equipment: 1.Autoloader 2.Corona treatment 3.Air compressor4.Air-cooled chiller

Product show

This picture is only for reference, the final machine is subject to customers' need .

HDPE blowing machine